Services

We are a major manufacturer of solid timber benchtops for the kitchen, office or dining room. Each job is run to order from a large range of available timbers, supplied as sanded blanks for fitting and finishing by your contractor.Tops are supplied in standard 30/32mm thickness but also 40/42 thickness and 20mm for shelving, small tops and window sills.

1. Seal the end grain now. Sealing the end grain is the first and most important task you must complete to help protect your laminated timber. Changes in temperature and weather can cause unwanted movement if the end grain is not sealed.
2. Keep away from moisture, direct sunlight, heat or wind. Do not store on bare ground – store on slats, loosely wrapped in plastic in a sheltered situation.
3. Benchtops must be stored on edge.
4. Seal or polish all faces and edges as soon as possible.
5. Install on site only after lock-up stage when wet trades have finished and the site has dried out.

IMPORTANT: If you have any doubts or concerns about the grade, moisture content or other quality aspects of this product do not install it! Instead contact your supplier immediately for advice.

Timberwest has no control over the installation process and accepts no responsibility for any part of the installation process.

Enhance your home with the beauty of solid timber floors. We supply the floorboards in your choice of timber as a tongue and groove or square dressed profile; professionally laid or DIY.. Please bear in mind that this is a natural product and variations in colour are to be expected. We can supply all Australian timbers – Spotted Gum, NSW and WA Blackbutt, Marri (pictured below) Jarrah and have a huge range of American Oak for flooring and stair treads. (Photo above is American Oak flooring stained) Visit our ‘Specials’ tab for our regular promotions.

If you are laying the flooring yourself we can help you by providing you with contact numbers for professional floor layers who, to the best of our knowledge, provide a good professional floor laying service. Phone us on 9409 5252 or email us on sales@www.timberwest.com.au for contact details of layers and floor sanders

Timber handrail square dressed with a 3mm pencil round or, for a softer look, a 9mm pencil round on the top and 6mm on the bottom can be run to order in small quantities. Profiles that require cutters (such as the 47mm diameter) have minimum quantity runs of 50 lm.

Other mouldings can be run to order but please be aware in some cases a minimum run and a setup charge would apply. We are always happy to quote on your requirements. Call us on 9409 5252 or email sales@www.timberwest.com.au

Solid Raw Timber Skirting boards and architraves

Run to order in any timber, size and profile we have cutters for. Please ask us for a quote. If you require a fitter for your skirting please contact Brad on nova05@westnet.com.au

A setup fee will apply for small runs. Please ask us for a quote.

We offer a varied range of high end Australian timber decking Standard and Better grade including a local WA mill Jarrah 130 x 19 decking. All decking is run smooth both sides pencil round all four sides (so best side up).

We also run external cladding and internal lining boards and can offer a FIRE RESISTANT EXTERNAL CLADDING – please ask for a quote

We have the stainless steel screws for fixing and the Smart Bit drill bit to countersink the screws for a professional finish.